How to Become an Electrician in North Dakota, ND

Check Electrician Schools in North Dakota, ND

As in the majority of the states, you have to be properly licensed before performing any electrical work in the state of North Dakota. If you wish to plan, lay out, supervise, install, make additions, make alterations, or make repairs, in the installation of wiring, apparatus, or equipment for electric light, heat, or power, you shall have to apply to the state Electrical Board for a license.

There are three types of electrical licenses in the state of North Dakota:

North Dakota State Electrical Board (NDSEB)

The licensing procedure is overlooked by the North Dakota State Electrical Board (NDSEB). The board is responsible for the examination of applicants and the issuance of licenses to those with the required qualifications and knowledge in the trade of electricity and electrical codes.

The board examines, via technical and practical examinations, whether an applicant possesses the required knowledge and skill to be versed in the laws of electricity. In that case he is issued a license in the class for which he was examined. As a licensee or permit holder, you will have to report your licensing or renewals to the electrical inspector in the municipality in which you operate (if there is one).

Additionally, the board has jurisdiction over all electrical installations in the state. As a result, the board may authorise electrical inspectors who have the authority to characterize installations hazardous to life and property, as well as order any electric service to be discontinued.

The contact information for the board can be found below:

North Dakota State Electrical Board
1929 N. Washington Street, Suite A-1
P.O. Box 7335
Bismarck, ND 58507-7335
(701) 328-9522
Fax: (701) 328-9524
https://www.ndseb.com/

The Board can also be contacted directly via its website using this form.

North Dakota Journeyman Electrician License Requirements

In order to be able to apply for a Journeyman Electrician license, you should have eight thousand (8,000) hours of experience, which may not be acquired in less than three years.

Additionally, you shall have registered as an apprentice electrician (of which up to three thousand hours may apply under the qualifications of a class B electrician) under the supervision of a contracting master or master of record licensed electrician in an area where electrical construction work is done and successfully completed apprentice electrician training.

If you are a graduate of a two-year electrical school approved by the state electrical board, you may be granted two thousand hours credit. Practical experience shall consist of a minimum of four thousand hours. For wiring and installing electrical wiring, apparatus and equipment, a maximum of eight thousand hours credit may be granted.

Apart from the above, credit allowed in other areas may include any combination of the following:

1) Maintaining and repairing electrical wiring, apparatus, and equipment: maximum of one thousand hours credit
2) Wiring and maintaining light, heat and power, and fire alarm technology circuits or systems: maximum of one thousand hours
3) Wiring process control circuits or systems; maximum of two thousand hours
4) Electrical construction experience gained in the armed forces of the United States: maximum of two thousand hours

Finally, you should have the necessary qualifications, training, and technical knowledge to wire, install, and repair electrical apparatus and equipment in accordance with the standard rules and regulations of the National Electrical Code.

For more details on applying for the electrical license please see here.

Finally, don’t forget to check Electrician Jobs in North Dakota.

North Dakota Master Electrician License Requirements

In order to be able to apply for a Master Electrician license, you should have at least one year of experience working as a licensed journeyman electrician under the supervision of a contracting master electrician or master of record.

The master electricians are categorized in three types, as follows:

Contracting master: A person responsible to comply to all regulation and legislation of the North Dakota wiring standards and has shown proof of liability insurance and contributed to the undertaking fund.

Master of record: A person responsible to comply to all regulation and legislation of the North Dakota wiring standards for the partnership, company, corporation, limited liability company, or association and has shown proof of liability insurance that the master of record is covered by the organization and has contributed to the undertaking fund. The master of record is not allowed to work on other property other than property owned or leased by the organization.

Non-contracting master: A person responsible to comply to all regulation and legislation of the North Dakota wiring standards and has the same responsibility as a journeyman electrician. Electrical work shall be done under the supervision of a contracting master or master of record.

For more details on applying for the electrical license please see here.

Finally, don’t forget to check Electrician Jobs in North Dakota.

North Dakota Class B Electrician License Requirements

In order to be able to apply for a Class B electrician license, you must have completed three thousand hours experience in farmstead or residential wiring, in one-family or two-family dwellings, under the supervision of a master or class B electrician. Commercial wiring experience will not be credited for experience toward a class B license. For a graduate of a two-year electrical school (approved by the state electrical board), one thousand hours credit will be granted.

For more details on applying for the electrical license please see here.

Finally, don’t forget to check Electrician Jobs in North Dakota.

Applying for an Electrical License in North Dakota

Before submitting an Application for an Electrical License, you will have to obtain and provide the appropriate information as follows:

- Original notarized “ND State Electrical Board Electrical Employment Verification Record”
The Employment Verification Record is required from each employer to verify and satisfy minimum hours of experience. (make copies as needed). The record has to be filled by the employer and signed by a licensed Master Electrician. Union Records/Letters are not accepted as verification records.

- In case of self-employment (complete prior work history on application for minimum hours), in order to be considered please submit additional information to be reviewed. Letters on official letterhead from the electrical inspector/governmental authority that have inspected the projects you’ve completed and explain what the requirements are for licensing, permit and inspection processes where you’ve completed work (Minimum 10,000 hours).

The application fees that apply are:

  • Master: $50
  • Journeyman: $25
  • Class B: $40

Note that the fees are non-refundable and should be made to NDSEB.

The license application form can be found here.

After successfully applying for a license, you will have to undertake the relevant examinations as described in the section below.

North Dakota Electrical License Exams

You will have to pass the relevant examination in order to acquire the respective electrician license.

After you have applied and your application has been approved by the Board, you will be ready for an exam and you will receive an invitation to take the examination. Along with the invitation, the available testing dates will be provided. After receiving the invitation, you should contact the State Electrical Board and inform the Board as to the date chosen to take the examination.

You will have six months from the exam invite date to take the test or you will have to submit another application along with the necessary fee.

To pass the exam you will have to achieve a score of over 70%.

Note that all licenses expire March 31 each year.

North Dakota Reciprocal Electrical License Agreements

Regarding license reciprocity, you should know that North Dakota is part of a Multi-State Reciprocal Licensing Group. Thus, there are reciprocal licensing agreements which apply to Master and Journeyman electricians as follows:

Master and Journeyman Licenses:

  • Minnesota
  • South Dakota

Journeyman Licenses Only:

  • Alaska
  • Idaho
  • Maine
  • Montana
  • Nebraska
  • New Hampshire
  • Utah

In order to qualify for a reciprocal license you must:

  1. Have passed a written examination from the state in which you plan on reciprocating from
  2. Provide proof of electrical construction experience up to 8,000 hours for the Journeyman license and up to 10,000 for the Master electrician license
  3. Possess a valid license in good standing and held that license for one (1) year in the state of examination before making the application.

No written examination is required for obtaining a reciprocal license.

The following fees apply:

Application Fee:

  • $25.00 (Journeyman)
  • $50.00 (Master)

License Fee (upon final verification and approval):

  • $25.00 (Journeyman)
  • $50.00 (Master)

Please note that if you apply for a reciprocal license in a state where you have failed the examinations, you shall not be eligible for a reciprocal license in that state.

You may find the reciprocal application form here.

North Dakota Electrical License Renewal

There are continuing education requirements for renewing your license. Each master, journeyman, and class B electrician license shall not be renewed unless the continued education requirements are met, of which a minimum of fifty percent of the hours must be based on the 2011 edition, the National Electrical Code. The remaining credits must be subjects related to the electrical industry.

More specifically, in order to renew your license, you must have eight (8) hours of continuing education (4 of which must be code) on file with the North Dakota State Electrical Board. For more information on the continuing education requirements, please check here.

You may renew your license online via the board’s page.

Please note that before accessing the page you should have the following at hand:

  • Your North Dakota State Electrical Board license number
  • The last four digits of your Social Security number
  • A valid credit card (Master/Visa/Discover)

Additionally, in the case of contracting master and class-B electricians, the following requirements apply:

  1. The State Electrical Board receives the name and registration / license number for each of your current employees that are doing electrical work in North Dakota. (Your employee’s registration / license must be renewed before your license will be renewed). You should submit your employee list here (If you do not have any employees working in North Dakota, please indicate “None” in both fields).
  2. A current Certificate of Liability Insurance must be on file with the State Electrical Board.
The above apply for the following largest cities (among others):
FargoBismarckGrand ForksMinotWest Fargo
DickinsonMandanWillistonJamestownWahpeton
Devils LakeValley CityGraftonBeulahRugby
LincolnHoraceWatford CityCasseltonHazen

Leave a Reply

Submit Comment
© 2012 ELECTRICIAN TRAINING INFO. All rights reserved.